Beantwoord enkele vragen, en binnen seconden geeft AI je een persoonlijk aankoopadvies op maat.
Beantwoord enkele vragen, en binnen seconden geeft AI je een persoonlijk aankoopadvies op maat.
EUROLITE Lifting ropes, safety bondsThe EUROLITE lifting ropes, safety bonds comply with the current regulation of the German professional insurance association as summed up in BGI 810-3:2007-03 Loads above persons. The lifting ropes, safety bonds are constructed in accordance with the European standards DIN EN 12385-4:2008-06 and DIN 56927:2009-03.The lifting ropes, safety bonds are tested by the LGA, an independent and accredited testing institute. The breaking load testified by the LGA is documented in the test report according to DIN EN 10204 required by the German professional insurance association.Clearly, every user can install and secure loads above persons with these lifting ropes, safety bonds in all areas where the BGV C1 is required.Use as attachment gearThese ropes are stamped with a WLL describing the maximum load when used for general lifting purposes. For all areas where the BGV C1 is required, the correct lifting rope must be selected only by table 2 of BGI 810-3:2007-03. According to this table, the maximum load of this rope is 70 kg (single-stranded).Use as safety bondThe correct safety bond must be selected only by table 9 of BGI 810-3:2007-03. According to this table, the maximum load of this safety bond is 15 kg.<br><br><p "">Installation rope, safety bond, safety</p><ul><li>Round strand rope 6 x 19 with fibre core</li><li>With two thimbles</li><li>Suitable for installing and securing loads above persons</li><li>Complies with DIN EN 12385-4:2008-06 and DIN 56927:2009-03</li><li>Rope with thimble</li><li>For further information about this product, please refer to the Data Sheet under "Downloads"</li></ul><br><br><table 'technicalData'><tr><td>Maximum load WLL (5-fold):</td><td>175 kg</td></tr><tr><td>Design of the core:</td><td>6 x 19 FC</td></tr><tr><td>Strength classification:</td><td>1960</td></tr><tr><td>Standard:</td><td>DIN EN 12385-4:2008-06, DIN 56927:2009-03</td></tr><tr><td>Nominal tensile strenght of rope:</td><td>1770 N/mm²</td></tr><tr><td>Wire surface:</td><td>Zinc-plated</td></tr><tr><td>Color:</td><td>Silver</td></tr><tr><td>Temperature range:</td><td>-40° C - +100° C</td></tr><tr><td>Dimensions:</td><td>Length: 1 m<BR>Diameter: à 4 mm</td></tr><tr><td>Weight:</td><td>80 g</td></tr><tr><td>Length weigth:</td><td>0,0554 kg/m</td></tr></table>
€5,65
Bekijk product
EUROLITE Lifting ropes, safety bondsThe EUROLITE lifting ropes, safety bonds comply with the current regulation of the German professional insurance association as summed up in BGI 810-3:2007-03 Loads above persons. The lifting ropes, safety bonds are constructed in accordance with the European standards DIN EN 12385-4:2008-06 and DIN 56927:2009-03.The lifting ropes, safety bonds are tested by the LGA, an independent and accredited testing institute. The breaking load testified by the LGA is documented in the test report according to DIN EN 10204 required by the German professional insurance association.Clearly, every user can install and secure loads above persons with these lifting ropes, safety bonds in all areas where the BGV C1 is required.Use as attachment gearThese ropes are stamped with a WLL describing the maximum load when used for general lifting purposes. For all areas where the BGV C1 is required, the correct lifting rope must be selected only by table 2 of BGI 810-3:2007-03. According to this table, the maximum load of this rope is 165 kg (single-stranded).Use as safety bondThe correct safety bond must be selected only by table 9 of BGI 810-3:2007-03. According to this table, the maximum load of this safety bond is 35 kg.<br><br><p "">Installation rope, safety bond, safety</p><ul><li>Round strand rope 6 x 19 with fibre core</li><li>With two thimbles</li><li>Suitable for installing and securing loads above persons</li><li>Complies with DIN EN 12385-4:2008-06 and DIN 56927:2009-03</li><li>Rope with thimble</li><li>For further information about this product, please refer to the Data Sheet under "Downloads"</li></ul><br><br><table 'technicalData'><tr><td>Maximum load WLL (5-fold):</td><td>400 kg</td></tr><tr><td>Design of the core:</td><td>6 x 19 FC</td></tr><tr><td>Strength classification:</td><td>1960</td></tr><tr><td>Standard:</td><td>DIN EN 12385-4:2008-06, DIN 56927:2009-03</td></tr><tr><td>Nominal tensile strenght of rope:</td><td>1770 N/mm²</td></tr><tr><td>Wire surface:</td><td>Zinc-plated</td></tr><tr><td>Color:</td><td>Silver</td></tr><tr><td>Temperature range:</td><td>-40° C - +100° C</td></tr><tr><td>Dimensions:</td><td>Length: 1 m<BR>Diameter: à 6 mm</td></tr><tr><td>Weight:</td><td>190 g</td></tr><tr><td>Length weigth:</td><td>0,0554 kg/m</td></tr></table>
€8,65
Bekijk product
EUROLITE Lifting ropes, safety bondsThe EUROLITE lifting ropes, safety bonds comply with the current regulation of the German professional insurance association as summed up in BGI 810-3:2007-03 Loads above persons. The lifting ropes, safety bonds are constructed in accordance with the European standards DIN EN 12385-4:2008-06 and DIN 56927:2009-03.The lifting ropes, safety bonds are tested by the LGA, an independent and accredited testing institute. The breaking load testified by the LGA is documented in the test report according to DIN EN 10204 required by the German professional insurance association.Clearly, every user can install and secure loads above persons with these lifting ropes, safety bonds in all areas where the BGV C1 is required.Use as attachment gearThese ropes are stamped with a WLL describing the maximum load when used for general lifting purposes. For all areas where the BGV C1 is required, the correct lifting rope must be selected only by calculating with safety-factor 12. According to this calculation, the maximum load of this rope is 450 kg (single-stranded).<br><br><p "">Lifting rope, safety bond, safety</p><ul><li>Round strand rope 6 x 19 with fibre core</li><li>With two thimbles</li><li>Suitable for installing and securing loads above persons</li><li>Complies with DIN EN 12385-4:2008-06 and DIN 56927:2009-03</li><li>Rope with thimble</li><li>LGA tested</li><li>For further information about this product, please refer to the Data Sheet under "Downloads"</li></ul><br><br><table 'technicalData'><tr><td>Maximum load WLL (5-fold):</td><td>1050 kg</td></tr><tr><td>Design of the core:</td><td>6 x 19 FC</td></tr><tr><td>Strength classification:</td><td>1770</td></tr><tr><td>Standard:</td><td>DIN EN 12385-4:2008-06, DIN 56927:2009-03</td></tr><tr><td>Nominal tensile strenght of rope:</td><td>1770 N/mm²</td></tr><tr><td>Wire surface:</td><td>Zinc-plated</td></tr><tr><td>Color:</td><td>Silver</td></tr><tr><td>Temperature range:</td><td>-40° C - +100° C</td></tr><tr><td>Dimensions:</td><td>Length: 1 m<BR>Diameter: à 1 cm</td></tr><tr><td>Weight:</td><td>1,30 kg</td></tr><tr><td>Length weigth:</td><td>0,359 kg/m</td></tr></table>
€26,15
Bekijk product
EUROLITE Lifting ropes, safety bondsThe EUROLITE lifting ropes, safety bonds comply with the current regulation of the German professional insurance association as summed up in BGI 810-3:2007-03 Loads above persons. The lifting ropes, safety bonds are constructed in accordance with the European standards DIN EN 12385-4:2008-06 and DIN 56927:2009-03.The lifting ropes, safety bonds are tested by the LGA, an independent and accredited testing institute. The breaking load testified by the LGA is documented in the test report according to DIN EN 10204 required by the German professional insurance association.Clearly, every user can install and secure loads above persons with these lifting ropes, safety bonds in all areas where the BGV C1 is required.Use as attachment gearThese ropes are stamped with a WLL describing the maximum load when used for general lifting purposes. For all areas where the BGV C1 is required, the correct lifting rope must be selected only by calculating with safety-factor 12. According to this calculation, the maximum load of this rope is 450 kg (single-stranded).<br><br><p "">Lifting rope, safety bond, safety</p><ul><li>Round strand rope 6 x 19 with fibre core</li><li>With two thimbles</li><li>Suitable for installing and securing loads above persons</li><li>Complies with DIN EN 12385-4:2008-06 and DIN 56927:2009-03</li><li>Rope with thimble and connector</li><li>LGA tested</li><li>For further information about this product, please refer to the Data Sheet under "Downloads"</li></ul><br><br><table 'technicalData'><tr><td>Maximum load WLL (5-fold):</td><td>1050 kg</td></tr><tr><td>Design of the core:</td><td>6 x 19 FC</td></tr><tr><td>Strength classification:</td><td>1770</td></tr><tr><td>Standard:</td><td>DIN EN 12385-4:2008-06, DIN 56927:2009-03</td></tr><tr><td>Nominal tensile strenght of rope:</td><td>1770 N/mm²</td></tr><tr><td>Wire surface:</td><td>Zinc-plated</td></tr><tr><td>Color:</td><td>Silver</td></tr><tr><td>Temperature range:</td><td>-40° C - +100° C</td></tr><tr><td>Dimensions:</td><td>Length: 1,5 m<BR>Diameter: à 1 cm</td></tr><tr><td>Weight:</td><td>1,47 kg</td></tr><tr><td>Length weigth:</td><td>0,359 kg/m</td></tr></table>
€38,65
Bekijk product
EUROLITE Lifting ropes, safety bondsThe EUROLITE lifting ropes, safety bonds comply with the current regulation of the German professional insurance association as summed up in BGI 810-3:2007-03 Loads above persons. The lifting ropes, safety bonds are constructed in accordance with the European standards DIN EN 12385-4:2008-06 and DIN 56927:2009-03.The lifting ropes, safety bonds are tested by the LGA, an independent and accredited testing institute. The breaking load testified by the LGA is documented in the test report according to DIN EN 10204 required by the German professional insurance association.Clearly, every user can install and secure loads above persons with these lifting ropes, safety bonds in all areas where the BGV C1 is required.Use as attachment gearThese ropes are stamped with a WLL describing the maximum load when used for general lifting purposes. For all areas where the BGV C1 is required, the correct lifting rope must be selected only by table 2 of BGI 810-3:2007-03. According to this table, the maximum load of this rope is 40 kg (single-stranded).Use as safety bondThe correct safety bond must be selected only by table 9 of BGI 810-3:2007-03. According to this table, the maximum load of this safety bond is 5 kg.<br><br><p "">Installation rope, safety bond, safety</p><ul><li>Round strand rope 6 x 19 with fibre core</li><li>With two thimbles</li><li>Suitable for installing and securing loads above persons</li><li>Complies with DIN EN 12385-4:2008-06 and DIN 56927:2009-03</li><li>Rope with thimble</li></ul><br><br><table 'technicalData'><tr><td>Maximum load WLL (5-fold):</td><td>100 kg</td></tr><tr><td>Design of the core:</td><td>6 x 19 WSC</td></tr><tr><td>Standard:</td><td>DIN EN 12385-4:2008-06, DIN 56927:2009-03</td></tr><tr><td>Nominal tensile strenght of rope:</td><td>1770 N/mm²</td></tr><tr><td>Wire surface:</td><td>Zinc-plated</td></tr><tr><td>Color:</td><td>Black</td></tr><tr><td>Temperature range:</td><td>-40° C - +100° C</td></tr><tr><td>Dimensions:</td><td>Length: 60 cm<BR>Diameter: à 3 mm</td></tr><tr><td>Weight:</td><td>40 g</td></tr><tr><td>Length weigth:</td><td>0,0311 kg/m</td></tr></table>
€4,39
Bekijk product
EUROLITE Lifting ropes, safety bondsThe EUROLITE lifting ropes, safety bonds comply with the current regulation of the German professional insurance association as summed up in BGI 810-3:2007-03 Loads above persons. The lifting ropes, safety bonds are constructed in accordance with the European standards DIN EN 12385-4:2008-06 and DIN 56927:2009-03.The lifting ropes, safety bonds are tested by the LGA, an independent and accredited testing institute. The breaking load testified by the LGA is documented in the test report according to DIN EN 10204 required by the German professional insurance association.Clearly, every user can install and secure loads above persons with these lifting ropes, safety bonds in all areas where the BGV C1 is required.Use as attachment gearThese ropes are stamped with a WLL describing the maximum load when used for general lifting purposes. For all areas where the BGV C1 is required, the correct lifting rope must be selected only by table 2 of BGI 810-3:2007-03. According to this table, the maximum load of this rope is 70 kg (single-stranded).Use as safety bondThe correct safety bond must be selected only by table 9 of BGI 810-3:2007-03. According to this table, the maximum load of this safety bond is 15 kg.<br><br><p "">Installation rope, safety bond, safety</p><ul><li>Round strand rope 6 x 19 with fibre core</li><li>With two thimbles</li><li>Suitable for installing and securing loads above persons</li><li>Complies with DIN EN 12385-4:2008-06 and DIN 56927:2009-03</li><li>Rope with thimble</li><li>For further information about this product, please refer to the Data Sheet under "Downloads"</li></ul><br><br><table 'technicalData'><tr><td>Maximum load WLL (5-fold):</td><td>175 kg</td></tr><tr><td>Design of the core:</td><td>6 x 19 FC</td></tr><tr><td>Strength classification:</td><td>1960</td></tr><tr><td>Standard:</td><td>DIN EN 12385-4:2008-06, DIN 56927:2009-03</td></tr><tr><td>Nominal tensile strenght of rope:</td><td>1770 N/mm²</td></tr><tr><td>Wire surface:</td><td>Zinc-plated</td></tr><tr><td>Color:</td><td>Black</td></tr><tr><td>Temperature range:</td><td>-40° C - +100° C</td></tr><tr><td>Dimensions:</td><td>Length: 1 m<BR>Diameter: à 4 mm</td></tr><tr><td>Weight:</td><td>80 g</td></tr><tr><td>Length weigth:</td><td>0,0554 kg/m</td></tr></table>
€5,65
Bekijk product
EUROLITE Lifting ropes, safety bondsThe EUROLITE lifting ropes, safety bonds comply with the current regulation of the German professional insurance association as summed up in BGI 810-3:2007-03 Loads above persons. The lifting ropes, safety bonds are constructed in accordance with the European standards DIN EN 12385-4:2008-06 and DIN 56927:2009-03.The lifting ropes, safety bonds are tested by the LGA, an independent and accredited testing institute. The breaking load testified by the LGA is documented in the test report according to DIN EN 10204 required by the German professional insurance association.Clearly, every user can install and secure loads above persons with these lifting ropes, safety bonds in all areas where the BGV C1 is required.Use as attachment gearThese ropes are stamped with a WLL describing the maximum load when used for general lifting purposes. For all areas where the BGV C1 is required, the correct lifting rope must be selected only by table 2 of BGI 810-3:2007-03. According to this table, the maximum load of this rope is 165 kg (single-stranded).Use as safety bondThe correct safety bond must be selected only by table 9 of BGI 810-3:2007-03. According to this table, the maximum load of this safety bond is 35 kg.<br><br><p "">Installation rope, safety bond, safety</p><ul><li>Round strand rope 6 x 19 with fibre core</li><li>With two thimbles</li><li>Suitable for installing and securing loads above persons</li><li>Complies with DIN EN 12385-4:2008-06 and DIN 56927:2009-03</li><li>Rope with thimble</li><li>For further information about this product, please refer to the Data Sheet under "Downloads"</li></ul><br><br><table 'technicalData'><tr><td>Maximum load WLL (5-fold):</td><td>400 kg</td></tr><tr><td>Design of the core:</td><td>6 x 19 FC</td></tr><tr><td>Strength classification:</td><td>1960</td></tr><tr><td>Standard:</td><td>DIN EN 12385-4:2008-06, DIN 56927:2009-03</td></tr><tr><td>Nominal tensile strenght of rope:</td><td>1770 N/mm²</td></tr><tr><td>Wire surface:</td><td>Zinc-plated</td></tr><tr><td>Color:</td><td>Black</td></tr><tr><td>Temperature range:</td><td>-40° C - +100° C</td></tr><tr><td>Dimensions:</td><td>Length: 1 m<BR>Diameter: à 6 mm</td></tr><tr><td>Weight:</td><td>200 g</td></tr><tr><td>Length weigth:</td><td>0,0554 kg/m</td></tr></table>
€8,65
Bekijk product
Certified cable holderCable holders can be used for easily suspending static workloads on attachment ropes. No tools are required. The load can be hung at any position and height and easily be re-positioned.The REUTLINGER cable holders are the only system certified by two independant certification bodies. This cable holder boasts of a TUV certificate and a German BGV C1 certificate and can be used in entertainment technology.TÃV GS and BGV C1 - double-tested and double-certifiedREUTLINGER® grippers type 50 SV III, type 66 SV III and type 80 SV III are not only certified as safe (GS) by the German TÃV, they have also been licensed for use within the scope of standard DGUV Regulation 17 (BGV C1).The DGUV Test certificate authorises these grippers for use within the scope of the accident prevention regulations issued by the German employers' liability insurance associations in respect of staging and production facilities.The test seal of the DGUV is conferred only after extensive examining of all load applications. Further testing simulated most anticipated mis-applications.REUTLINGER® gripper ranges 50, 66 and 80 are the only load-bearing devices certified by the DGUV for use in mobile production facilities.<br><br><p "">Cable glider, up to 90 kg work load</p><ul><li>For rope diameters 4.0 to 5.0 mm</li><li>6-ball mechanism</li><li>Please note: Cable gliders must not be used for dynamic loads. Always use at least 2 cable gliders for every suspended object.</li><li>M12 thread</li><li>Made in Germany</li><li>BG certified</li><li>TÃV/GS certified</li><li>For further information about this product, please refer to the Data Sheet under "Downloads"</li></ul><br><br><table 'technicalData'><tr><td>For rope diameter:</td><td>4 mm - 5 mm</td></tr><tr><td>Work load:</td><td>5 mm: 90 kg<BR>4 mm: 60 kg</td></tr><tr><td>Color:</td><td>Black</td></tr><tr><td>Thread:</td><td>M12 thread x 17 mm</td></tr><tr><td>Dimensions:</td><td>Length: 7 cm<BR>Diameter: à 2,50 cm</td></tr><tr><td>Weight:</td><td>120 g</td></tr></table>
€49,89
Bekijk product
Certified cable holderCable holders can be used for easily suspending static workloads on attachment ropes. No tools are required. The load can be hung at any position and height and easily be re-positioned.The REUTLINGER cable holders are the only system certified by two independant certification bodies. This cable holder boasts of a TUV certificate and a German BGV C1 certificate and can be used in entertainment technology.TÃV GS and BGV C1 - double-tested and double-certifiedREUTLINGER® grippers type 50 SV III, type 66 SV III and type 80 SV III are not only certified as safe (GS) by the German TÃV, they have also been licensed for use within the scope of standard DGUV Regulation 17 (BGV C1).The DGUV Test certificate authorises these grippers for use within the scope of the accident prevention regulations issued by the German employers' liability insurance associations in respect of staging and production facilities.The test seal of the DGUV is conferred only after extensive examining of all load applications. Further testing simulated most anticipated mis-applications.REUTLINGER® gripper ranges 50, 66 and 80 are the only load-bearing devices certified by the DGUV for use in mobile production facilities.<br><br><p "">Cable glider, up to 90 kg work load</p><ul><li>For rope diameters 4.0 to 5.0 mm</li><li>6-ball mechanism</li><li>With fork 14 x 28 black zinc plated</li><li>Please note: Cable gliders must not be used for dynamic loads. Always use at least 2 cable gliders for every suspended object.</li><li>M12 thread</li><li>Made in Germany</li><li>BG certified</li><li>TÃV/GS certified</li><li>For further information about this product, please refer to the Data Sheet under "Downloads"</li></ul><br><br><table 'technicalData'><tr><td>For rope diameter:</td><td>4 mm - 5 mm</td></tr><tr><td>Work load:</td><td>5 mm: 90 kg<BR>4 mm: 60 kg</td></tr><tr><td>Color:</td><td>Black</td></tr><tr><td>Thread:</td><td>M12 thread x 17 mm</td></tr><tr><td>Opening:</td><td>14-28 mm</td></tr><tr><td>Dimensions:</td><td>Length: 12,20 cm<BR>Diameter: à 2,50 cm</td></tr><tr><td>Weight:</td><td>370 g</td></tr></table>
€71,15
Bekijk product
Certified cable holderCable holders can be used for easily suspending static workloads on attachment ropes. No tools are required. The load can be hung at any position and height and easily be re-positioned.The REUTLINGER cable holders are the only system certified by two independant certification bodies. This cable holder boasts of a TUV certificate and a German BGV C1 certificate and can be used in entertainment technology.TÃV GS and BGV C1 - double-tested and double-certifiedREUTLINGER® grippers type 50 SV III, type 66 SV III and type 80 SV III are not only certified as safe (GS) by the German TÃV, they have also been licensed for use within the scope of standard DGUV Regulation 17 (BGV C1).The DGUV Test certificate authorises these grippers for use within the scope of the accident prevention regulations issued by the German employers' liability insurance associations in respect of staging and production facilities.The test seal of the DGUV is conferred only after extensive examining of all load applications. Further testing simulated most anticipated mis-applications.REUTLINGER® gripper ranges 50, 66 and 80 are the only load-bearing devices certified by the DGUV for use in mobile production facilities.<br><br><p "">Cable glider, up to 90 kg work load</p><ul><li>For rope diameters 4.0 to 5.0 mm</li><li>6-ball mechanism</li><li>With side exit hole</li><li>Please note: Cable gliders must not be used for dynamic loads. Always use at least 2 cable gliders for every suspended object.</li><li>M12 thread</li><li>Made in Germany</li><li>BG certified</li><li>TÃV/GS certified</li><li>For further information about this product, please refer to the Data Sheet under "Downloads"</li></ul><br><br><table 'technicalData'><tr><td>For rope diameter:</td><td>4 mm - 5 mm</td></tr><tr><td>Work load:</td><td>5 mm: 90 kg<BR>4 mm: 60 kg</td></tr><tr><td>Color:</td><td>Black</td></tr><tr><td>Thread:</td><td>M12 thread x 10 mm</td></tr><tr><td>Dimensions:</td><td>Length: 8,90 cm<BR>Diameter: à 2,50 cm</td></tr><tr><td>Weight:</td><td>250 g</td></tr></table>
€62,39
Bekijk product